Send Email
Send SMS
Search
Reverse POE Switches
Reverse PoE Switches are designed specifically for Internet Service Providers to rollout broadband services faster with lower Capex and Opex. It solves major problem of power arrangement required at last mile buildings.Reverse POE Switch with Built In Media Converter
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,500 / PieceGet Latest Price
Product Details:| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| VLAN | Available |
| Cascading | Possible 1 Main + 3 Switches of NS-ER7-P1 |
| Brand | NETSTAR |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.
Specifications:
| Ethernet Connector | 7xRJ45 connector 10/100Base-TX with Auto-MDIX & 1x100 base FX Port (13T for 1310nm-TX & 1550nm-RX or 15T for 1550nm-TX & 1310nm-RX |
| Uplink | 1 x 10/100 Base FE fiber Port (Port8) |
| Downlink | 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port - 148,800pps 10Mbps Port - 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-ER7-F1
Yes! I am Interested
View PDF
Reverse PoE Switch with 24 V PoE Out Uplink Port
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| Brand | NETSTAR |
| VLAN | Available |
| Cascading | Possible - 1 Main + 3 Switches of NS-ER7-P1 |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.
Specifications:
| Ethernet Connector | RJ45 Jacks (8 Port) 10/100Base-TX with Auto-MDIX |
| Uplink | 1 x 10/100 Base T Uplink PoE Out Port (24V) (Port8) |
| Downlink | 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port — 148,800pps 10Mbps Port — 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| No of ethernet port that can power on the switch & ONU | Anyone/All of the seven Downlink Ports |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. OPE)) |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-ER7-P1
Yes! I am Interested
View PDF
Outdoor Reverse POE Switch for Wireless CPE
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| Brand | NETSTAR |
| VLAN | Available |
| Cascading | Possible - 1 Main + 3 switches of NS-ER7-P1 |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.
Specifications:
| Ethernet Connector | RJ45 Jacks (8 Port) 10/100Base-TX with Auto-MDIX |
| Uplink | 1 x 10/100 Base T Uplink PoE Out Port (24V) (Port8) |
| Downlink | 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port — 148,800pps 10Mbps Port — 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| No of ethernet port that can power on the switch ONU | Anyone/All of the seven Downlink Ports |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. OPE)) |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-RP071P-OD(Outdoor-Casing)
Yes! I am Interested
View PDF
Outdoor Reverse PoE Switch with Built In Media Converter
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| Brand | Netstar |
| VLAN | Available |
| Cascading | Possible - 1 Main + 3 Switches of NS-ER7-P1 |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.
Specifications:
| Ethernet Connector | 7xRJ45 connector 10/100Base-TX with Auto-MDIX & 1x100 base FX Port (13T for 1310nm-TX & 1550nm-RX or 15T for 1550nm-TX & 1310nm-RX |
| Uplink | 1 x 10/100 Base FE fiber Port (Port8) |
| Downlink | 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port — 148,800pps 10Mbps Port — 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-RP071FOutdoor
Yes! I am Interested
Reverse PoE Switch with Two 24 V PoE Out Uplink Port
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| VLAN | Available |
| Cascading | Possible - 1 Main + 3 Switches of NS-ER7-P1 |
| Brand | NETSTAR |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main 2 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Port Base Isolation Can be Enabled or Disable using DIP Switch.
Specifications:
| Ethernet Connector | RJ45 Jacks (8 Ports) 10/100Base-TX with Auto-MDIX |
| Uplink | 1 x 10/100 Base T Uplink PoE Out Port(24V) (Port 8) |
| Downlink | 6 x 10/100 Base T Reverse P. Ports (Port 1 to Port 7) (Data + Power IN) & 1x10/100 base PoE out port 24V Port 1 |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port - 148,800pps 10Mbps Port - 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. OPE)) |
| No of ethernet port that can power on the switch & ONU | Anyone/All of the seven Downlink Ports |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-ER6-P2
Yes! I am Interested
View PDF
Reverse POE Switch with Fiber Uplink Port & 5 VDC Out
REQUEST CALLBACK
Get Best Quote
Approx. Rs 2,600 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| VLAN | Available |
| Cascading | Possible - 1 Main + 3 Switches of NS-ER7-P1 |
| Brand | Netstar |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3Switches of NS-ER7-P1).
- Port Base isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Specifications:
| Ethernet Connector | 7xRJ45 connector 10/100Base-TX with Auto-MDIX & 1x100 base FX Port (13T for 1310nm-TX & 1550nm-RX or 15T for 1550nm-TX & 1310nm-RX |
| Uplink | 1 x 10/100 Base FE fiber Port (Port8) |
| Downlink | 7 x 10/100 Base T Reverse PoE Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMA/CD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port - 148,800pps 10Mbps Port - 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| No of ethernet port that can power on the switch & ONU | Anyone/All of the seven Downlink Ports |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| DC Out | 5V DC Out through DC Jack for powering other Device like ONU |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | +VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt(PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 171 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-ER7-F1-V5
Yes! I am Interested
View PDF
Reverse POE Switch with 24V POE Out Uplink Port & 12VDC Out
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| Brand | NETSTAR |
| Hardware VLAN | Enable Disable Using DIP Switch |
| Cascading | Possible - 1 Main + 3 Switches of NS-ER7-P1 |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Specifications:
| Ethernet Connector | RJ45 Jacks (8 Ports) 10/100Base-TX with Auto-MDIX |
| Uplink | 1 x 10/100 Base T Uplink PoE Out Port(24V) (Port 8) |
| Downlink | 7 x 10/100 Base T Reverse P. Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMNCD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port — 148,800pps 10Mbps Port — 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power Over Ethernet Injector Power Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. OPE)) |
| No of ethernet port that can power on the switch & ONU | Anyone/All of the seven Downlink Ports |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| DC Out | 12V DC Out through DC Jack for powering other Device like ONU |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 178 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non condensing |
Additional Information:
- Item Code: NS-ER7-P1-V12
Yes! I am Interested
View PDF
Reverse POE Switch
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,200 / PieceGet Latest Price
Product Details:| Minimum Order Quantity | 1 Piece |
| Number of Ports | 8 |
| Area Network Type | LAN Capable |
| Data Rate (Mbps) | 10/100 |
| Color | Black |
| DC Power Adapter | 24V |
| Connector | RJ45 |
| Data Transfer Rate (Mbps) | 100 |
| Enclosure Type | PC |
| Switching Capacity (Gbps) | 10/100Mbps |
| Power Saving | Yes |
| Network Cable | Cat5 or Cat6 |
| Button Reset | No |
| Power Consumption (W) | 2 |
| Weight (g) | 200 |
| Condition | New |
| Warranty | 1 Year |
| Place Of Origin | Ahmedabad |
| Downlink Port | 7 |
| Surge Immunity (Kv) | 2.5 |
| Storage Temperature | 0~60 |
| Brand | NETSTAR |
| VLAN | Available |
| CASCADING | Available |
NETSTAR switch has intelligent Power management features solving a major problem of powering the device for Internet Service Provider. This switch can be powered using Remote Power from customer using specially designed NETMODEM (PoE Injector) or any standard PoE Injector (24V DC, 0.75 AMP). This eliminates the needs of arranging power at building top (UPS not require/ No need to pay more money to customer or society). This saves lot of MONEY of ISPs and improves uninterrupted service to the customer.
Additional Information:
- Item Code: NS-ER7-E-V12
Yes! I am Interested
View PDF
Reverse POE Switch for ONU
REQUEST CALLBACK
Get Best Quote
Approx. Rs 1,800 / PieceGet Latest Price
Product Details:| Area Network Type | LAN Capable |
| LED Indicator | Required |
| Data Rate (Mbps) | 10/100 |
| VLAN | Available |
| Cascading | Posiible 1 Main + 3 switches of NS-ER7-P1 |
Features:
- Cascading Support: Switches can be Cascaded for more users per Building (Up to 1 Main + 3 Switches of NS-ER7-P1).
- Port Base Isolation/Hardware VLAN: The feature of Port Isolation is implemented in this unit wherein the Ethernet Data of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other.
Specifications:
| Ethernet Connector | RJ45 Jacks (8 Ports) 10/100Base-TX with Auto-MDIX |
| Uplink | 1 x 10/100 Base T Uplink PoE Out Port(24V) (Port 8) |
| Downlink | 7 x 10/100 Base T Reverse P. Ports (Port 1 to Port 7) (Data + Power IN) |
| Standards | IEEE Std. 802.3 10BASE-T 10Mbps, Half/Full Duplex |
| IEEE Std. 802.3u 100BASETX, 10/100Mbps, Half/Full Duplex | |
| IEEE Std. 802.3x Flow control and Back-pressure. | |
| IEEE Std. 802.3az Energy Efficient Ethernet | |
| Protocols | CSMNCD |
| Transmission method | Store and Forward |
| MAC address | 1K MAC address |
| Packet buffer | Embedded 448K bits packet buffer |
| Maximum forwarding packet length | 1536 bytes |
| Filtering/forwarding rates | 100Mbps Port — 148,800pps 10Mbps Port — 14,880pps |
| Network cable | 4-pair UTP/STP Cat 5 cable |
| LEDs | Link/Activity per Ethernet port Power: On/Off for Switch Power: On/Off for PoE Injector |
| Power over ethernet injector: Power supply in | Power Over Ethernet Injector Power Power over Ethernet 24V @ 18YV on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. OPE)) |
| No of ethernet port that can power on the switch & ONU | Anyone/All of the seven Downlink Ports |
| Power over ethernet | Power over Ethernet Injector on Four Pair Cable |
| DC Out | 12V DC Out through DC Jack for powering other Device like ONU |
| Ethernet devices that can be powered | Single |
| CAT-5 Cable Data Lines | Pair 1: Pins 1/2, Pair 2: Pins3/6 |
| CAT-5 Cable Power Lines | + VDC: Pins 4/5, -VDC: Pins 7/8 |
| Power consumption | 2 Watt (Switch) |
| 5 Watt (PoE Injector) | |
| Dimension of Switch | 158mm x 60rnm x 50mm |
| Weight of Switch | 178 gm |
| Operating Temperature | 0 deg to 50 deg c |
| Storage environment | 0 deg to 75 deg c |
| Operating Humidity | 20% to 95% non-condensing |
Additional Information:
- Item Code: NS-ER7-E1-V12
Yes! I am Interested
View PDF
Looking for Reverse POE Switches ?
X
Explore More Products
Contact via E-mail
Contact via SMS
Megastar Computer Services
Brijesh Parmar (Business Development Manager)
Brijesh Parmar (Business Development Manager)
A-2, Satellite Apartment, Near Kameshwar School Jodhpur Cross Road, Satellite Road,
Ahmedabad - 380015, Gujarat, India
Ahmedabad - 380015, Gujarat, India
Call Us: Call Response Rate: 88%
© Megastar Computer Services. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited